G-Code Placeholders

Note

These notes apply to the Prusa i3 Mk3 printer. If you are using a different printer, please verify the hardware details are same. These pages may be a bit rough as I revise them and add new material. Please check back regularly for updates.

Table 1 Slic3rPE G-Code Placeholders
Value Placeholder
First Layer Temperature [first_layer_temperature]
First Layer Bed Temperature [first_layer_bed_temperature]
Table 2 Cura G-Code Placeholders
Value Placeholder
First Layer Temperature {material_print_temperature_layer_0}
First Layer Bed Temperature {material_bed_temperature_layer_0}
Table 3 Simplify 3D G-Code Placeholders
Value Placeholder
First Layer Temperature [extruder0_temperature]
First Layer Bed Temperature [bed0_temperature]
Table 4 IdeaMaker G-Code Placeholders
Value Placeholder
First Layer Temperature {temperature_extruder1}
First Layer Bed Temperature {temperature_heatbed}
Table 5 KISSlicer G-Code Placeholders
Value Placeholder
First Layer Temperature <MAIN1>
First Layer Bed Temperature <BED>

Contact and feedback

You can find me on the Prusa forums or Reddit where I lurk in many of the 3D printing-related subreddits.

Last updated on Dec 11, 2018