PrusaSlicer Printer Settings Tab
Note
These notes are based on my experiences with the Prusa i3 Mk3 and Artillery/Evnovo Sidewinder X1 printers. If you are using a different printer, please verify the hardware details are similar.
Important
I am doing a massive update based on the recent name change from Slic3rPE to PrusaSlicer. Please bear with me while I update everything.
Todo
Complete printer settings tab documentation
General

Printer general settings
Size and coordinates
Capabilities
Print Host upload
Firmware
Advanced
Custom G-code

Printer custom g-code settings
Start G-code
End G-code
Before layer change G-code
After layer change G-code
Tool change G-code
Machine limits

Printer machine limit settings
Maximum feedrates
Maximum accelerations
Jerk limits
Minimum feedrates
Extruder 1

Printer machine limit settings
Size
Layer height limits
Position (for multi-extruder printers)
Retraction
Retraction when tool is disabled (advanced settings for multi-extruder setups)
Preview
Dependencies

Printer dependency settings
Profile Dependencies
Contact and feedback
You can find me on the Prusa support forums or Reddit where I lurk in many of the 3D printing-related subreddits. I occasionally drop into the Official Prusa 3D discord server where I can be reached as bobstro (bobstro#9830). You can email me directly at projects@ttlexceeded.com.
Last updated on 20190831