1.2.17. Using PrusaSlicer modifiers

Todo

Using modifiers with PrusaSlicer.

Note

These notes are based on my experiences with the Prusa i3 Mk3 and Artillery/Evnovo Sidewinder X1 printers. If you are using a different printer, please verify the hardware details are similar.

1.2.17.1. Selecting the model

Sample part

Fig. 1.15 Sample part

1.2.17.2. Creating a modifier

Creating a modifier

Fig. 1.16 Creating a modifier

1.2.17.3. Adjusting a modifier

Adjusting a modifier

Fig. 1.17 Adjusting a modifier

1.2.17.4. Adding additional modifiers

Sample part

Fig. 1.18 Creating a modifier

1.2.17.5. Verifying modifier results

Verfifying modifier results

Fig. 1.19 Verfifying modifier results

You can download this example here.

Contact and feedback

You can find me on the Prusa support forums or Reddit where I lurk in many of the 3D printing-related subreddits. I occasionally drop into the Official Prusa 3D discord server where I can be reached as bobstro (bobstro#9830). You can email me directly at projects@ttlexceeded.com.

Last updated 20190831